Dear Valued Customer, We are upgrading our customer portal to enhance your experience. For Support, please send mail on support@seqrite.com Thank you for your patience and understanding. Best regards, Seqrite

How-To Articles

How to add USB dongle to exception in Advanced Device Control

02-04-2020 01:58:42

Below are the steps to add a USB dongle with the exception of Advanced Device Control:

1. Login to the EPS console webpage.

2. Go to Admin Settings > Server > Manage Devices.

3. Click Add Devices > Network Devices.

4. Select Endpoint.

5. Search for the endpoint system from the list.

6. You will be able to see a list of connected devices to the system.

7. Select the required device, i.e., USB Dongle device.

8. Click OK.

9. Go to Advanced Device Control policy and select Exceptions.

10. Click Add.

11. You will be able to see the USB Dongle entry in the list.

12. Switch the Add to Exceptions tab to Yes.

13. Click OK.

14. In the Exceptions list, give Allow access to the USB Dongle device.

15. Save the policy.

Please contact Seqrite Technical Support for more assistance.