Dear Valued Customer, We are upgrading our customer portal to enhance your experience. For Support, please send mail on support@seqrite.com Thank you for your patience and understanding. Best regards, Seqrite

How-To Articles

How to configure SNMP under EPS products.

02-04-2020 01:19:53

Seqrite’s Support to SNMP Trap

This article provides information about Seqrite’s support to Simple Network Management Protocol (SNMP) Trap for virus notifications.

What is SNMP Trap?

SNMP Trap is an alert message with abstract information about an event sent from an endpoint to its configured SNMP server. It notifies the administrator about an event that has occurred at an endpoint. Windows’ service, ‘SNMP Trap service’ listens for traps on UDP port 162, by default.

At present, Seqrite covers the following events under virus notifications:

  1. Virus detected
  2. Virus active in memory
  3. Ransomware attack detected

SNMP Trap Notifications Management:

The Trap notifications can be viewed in the SNMP manager, which must be connected to an SNMP server where the configuration file, seqrite.mib is imported.

You can find the seqrite.mib file at the end of this article.

SNMP Object Identifiers (OID) for Trap Notifications:

Let’s understand OID and MIB first.

  • OID (Object Identifiers)
    Object Identifiers is a unique identification of an object in a Management Information Base (MIB). OIDs are based on a tree structure and notation is a dotted string of numbers. Example - 1.3.6.1.4.1.51801.1.1.1

  • MIB (Management Information Base)
    A Management Information Base (MIB) describes a database as a set of managed objects which is most often associated with the Simple Network Management Protocol (SNMP). The database is hierarchical (tree-structured) and each entry is addressed through an object identifier (OID). Each managed object in a MIB has a unique identifier. The identifier includes the object's type, access level.

OID for Seqrite

  • OID’s for System information

Name

siMacID

OID

1.3.6.1.4.1.51801.1.1.1

MIB

Seqrite.mib

Syntax

OCTET STRING

Description

MAC ID

Name

siIPAddress

OID

1.3.6.1.4.1.51801.1.1.2

MIB

Seqrite.mib

Syntax

OCTET STRING

Description

IP Address

Name

siComputerName

OID

1.3.6.1.4.1.51801.1.1.3

MIB

Seqrite.mib

Syntax

OCTET STRING

Description

Computer Name

  • OID’s for Virus notifications

Name

virusFilePath

OID

1.3.6.1.4.1.51801.1.2.1.1

MIB

Seqrite.mib

Syntax

OCTET STRING

Description

File Path

Name

virusName

OID

1.3.6.1.4.1.51801.1.2.1.2

MIB

Seqrite.mib

Syntax

OCTET STRING

Description

Virus Name

Name

virusAction

OID

1.3.6.1.4.1.51801.1.2.1.3

MIB

Seqrite.mib

Syntax

OCTET STRING

Description

Action


Please contact Seqrite Technical Support for more assistance.