Windows

Downloading the Windows Client Package

To download the Endpoint Protection Windows client package, follow these steps:

1. Log in to the Seqrite CSM Console.

2. Navigate to Deployment.

3. Download the Windows client package using either the Online Installer or Email Installer option.

4. Select the appropriate package based on the target endpoint architecture:

   • Windows 64-bit (SUAwin64.zip)
   • Windows 32-bit (SUAwin32.zip)

Deploying Windows Clients Using ManageEngine

To deploy Endpoint Protection clients using the Custom Script method in ManageEngine, follow these steps:

1. In ManageEngine, select Windows from the Add Packages drop-down menu.

2. Enter the package details:

   • Package Name: Specify a name for the package.
   • Package Type: Select .exe.
   • License Type: Select Non-Commercial.
   • Locate Installable: Browse and select the downloaded Windows client package (for example, SUAwin64.zip).

3. Configure the installation command:

   • Command with Switches/Arguments: SUA_windows-x64.exe -q

   Note: Use the appropriate executable name based on the downloaded package.

4. Navigate to:
   Software Deployment > Deployment > Install/Uninstall Software > Computer Configuration under the Windows section.

5. Configure the deployment settings:

   • Name: Specify a deployment name.
   • Operation Type: Select Install.
   • Package Name: Select the package created in the previous steps.
   • Deployment Policy: Select Deploy any time at the earliest.

6. Define the target endpoints:

   • Select the required Remote Office or Domain.
   • Specify the target endpoint IP addresses, if required.

7. To automatically retry failed deployments, select Retry this Configuration on failed Targets.

8. Click Deploy Immediately to start the deployment.

9. Verify that the deployment is completed successfully and that the Endpoint Protection client is installed on the target endpoints.